내전압시험기 렌탈, 절연저항시험기 렌탈 EXTECH 7440 > 내전압 안전규격시험기

본문 바로가기

테스터벨리
내전압시험기 렌탈, 절연저항시험기 렌탈 EXTECH 7440 > 내전압 안전규격시험기

내전압시험기 렌탈, 절연저항시험기 렌탈 EXTECH 7440 요약정보 및 구매

제조사 익스텍
브랜드 EXTECH
품명 내전압,절연저항시험기
모델명 7440
판매가격 전화문의
(상기 금액은 부가세 별도입니다.)

제품관련 문서 / 파일

상품 정보

상품 상세설명

구입 및 기술문의 : 010-4221-0660

 

7400 시리즈는 ACW, DCW, IR, Ground Bond 등 전기적 Safety 테스트를 하나의 장비로 할 수 있는 장비 입니다.
특징
1. AC/DC Withstanding Voltage (ACW and DCW)/ Insulation Resistance (IR)/ Ground Bond (GND) tests
2. Single 20 x 2 LCD Display
3. Optional built-in 4 channels or 8 channels Scanner (7420, 7430 & 7440)
4. 50개의 메모리와 메모리당 30개의 스텝 저장 가능
5. Auto Offset, GB Test
6. Front panel software calibration
7. Built-in PLC Remote interface
8. Front Panel Lockout
9. GPIB (IEEE-488), RS232 or printer interfaces control
10. Line and load regulation maintains the output voltage within 1% of setting

7400 Series Electrical Safety Compliance Analyzer

MODEL7410742074307440
AC WITHSTAND VOLTAGE
Output Rating5KVAC / 30mA5KVAC / 30mA5KVAC / 40mA5KVAC / 40mA
RangeResolutionAccuracy
Output Voltage,ACV0 - 50001±(2% of setting + 5V)
Output Frequency50Hz / 60Hz ± 0.1%, User Selectable
Output WaveformSine Wave ,THD. < 2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation± (1% of output + 5V), From no load to full load
SETTINGS
Hi-Limit AC Current, mA0 - 30.000 - 30.000 - 40.000 - 40.00
Resolution : 0.01, Accuracy : ±(2% of setting + 3counts)
Lo-Limit AC Current, mARange : 0 - 9.999
Resolution : 0.001, Accuracy : ±(2% of setting + 3counts)
Ramp Time, second0.1 - 999.90.1±(0.1% + 0.05sec)
Dwell Time, second0, 0.3 - 999.9
(0=continuous)
0.1
Arc DetectionThe range is from 1 - 9 (9 is the most sensitive)
AC Current Offset, mA0 - 2.000 or Auto Set
DC WITHSTAND VOLTAGE
Output Rating6KVDC/9999μA
Output Voltage, DCV0 - 60001±(2% of setting + 5V)
Output Ripple< 5% (6KV / 9999 μA at Resistive Load)
SETTINGS
Hi-Limit DC Current, µA0 - 99991±(2% of setting + 3counts)
Lo-Limit DC Current, µA0 - 999.90.1±(2% of setting + 3counts)
Ramp Time, second0.1 - 999.90.1± (0.1% of setting + 0.05s)
Dwell Time, second0, 0.4 - 999.9
(0=continuous)
0.1
Arc DetectionThe range is from 1 - 9 (9 is the most sensitive)
DC Current Offset, ?A0 - 200.0 or Auto Set
Ramp High CurrentON/OFF, User Selectable
Charge - Low Current, µA0 - 350.0 or Auto Set
Discharge Time? 200 msec
INSULATION RESISTANCE
Output Rating1KVDC / 9999MΩ
Output Voltage, DCV100 - 10001± (2% of setting + 3V)
Hi-Limit Resistance, MΩ0, 1 - 9999 (0=OFF)1100 - 499V
1 - 999.9, ± (8% of setting + 2counts)
500 - 1000V
1 - 999.9, ± (2% of setting + 2counts)
1000 - 9999, ± (8% of setting + 2counts)
Lo-Limit Resistance, MΩ1 - 99991
Delay Time, second0, 0.5 - 999.9
(0=continuous)
0.1±(0.1% + 0.05sec)
Charge - Low Current, µA0 - 3.500 or Auto Set
GROUND BOND (7440 ONLY)
Output Rating30A / 600mΩ, 8V
Output AC Current, A3.00 - 30.000.01± (2% of setting +3 counts)
Output AC Voltage, V3.00 - 8.000.01± (2% of setting +3 counts) at Open circuit
Output Frequency50Hz/60Hz ±100ppm, User Selectable
SETTINGS
Hi-Limit Resistance, mΩ0 - 150 (3 - 30A)1± (2% of setting +2 counts)
Lo-Limit Resistance, mΩ0 - 600 (3 - 10A)
Lead Resistance Offset, mΩ0 -2001± (2% of setting +2 counts)
Dwell Time, second0, 0.5 - 999.9 sec (0=continuous)0.1± (0.1% of setting + 0.05s)
MEASUREMENT
AC/DC Voltage, KV0 - 6.000.01±(1.5% of reading ) > 500V
±(1.5% of reading + 1 count) < 500V
DC Voltage, V (IR)100 - 10001±(1.5% of reading + 3V)
AC Current Range, mA0 - 3.5000 - 3.5000 - 3.5000 - 3.500
3.00 - 30.003.00 - 30.003.00 - 40.003.00 - 40.00
AC Current Resolution, mA0.001 / 0.01
AC Current Accuracy, mA± (2% of reading + 3counts)
DC Current Range, µA0 - 350.00.1± (2% of reading + 3counts)
300 - 35001
3000 - 999910
AC Current, A (GB)0 - 35.000.01±(2% of reading+3counts)
Resistance, , MΩ(IR)1 - 9999
(Auto Range)
0.001
0.01
0.1
1
100 - 499V
1 - 999.9, ± (8% of reading + 2counts)
500 - 1000V
1 - 999.9, ± (2% of reading + 2counts)
1000 - 9999, ± (8% of reading + 2counts)
Resistance, , mΩ (GB)0 - 6001±(2% of reading+2counts)
GENERAL
Input Voltage AC115V / 230Vac ± 15%, 50Hz / 60Hz ± 5%, max. current 5A for 7410 model, max. current 6.3A for 7420 / 7430 / 7440 model
PLC Remote ControlInput : Test, Reset, Memory1, 2, 3
Output : Pass, Fail, Processing
Memory50 memories, 8 steps/memory
Display20×2 LCD with back light
Key LockTo prevent unauthorized alteration of the test Parameters
CalibrationBuild-in software and external calibrated meters
Alarm Volume SettingRange: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Rear Panel OutputYESYESYESYES
Built-in Scanner-8 CHANNELSOPTIONOPTION
External ScannerYESYESYESYES
Smart GFIYESYESYESYES
Analog Meter--YESYES
RS232 InterfaceOPTIONOPTIONYESYES
GPIB InterfaceOPTIONOPTIONOPTIONOPTION
Printer InterfaceOPTIONOPTIONOPTIONOPTION
TUV-GS listed--YESYES
CE Compliance--YESYES
Environment0-40℃, 20-80%RH
Dimension (W × H × D), mm430 × 133 × 300430 × 133 × 500430 × 133 × 500
Net Weight12Kg18Kg22Kg
STANDARD ACCESSORIES
Power Cord(10A)×1
Fuses×2 (Including a spare contained in the fuse holder)
Hipot Test Lead ,1.5m(1101)×1
Return Test Cable(1102)×1
Ground Bond Test Lead 30A, 1.5m (1103)---×1
Ground Bond Return Lead 30A, 1.5m (1104)---×1
Hipot Output Link Lead, 1.5m (1109)-×8--
RS232 Link Cable 1.5m (1130)--×1×1
Disk (RS232 test program)--×1×1
*product specifications are subject to change without notice.

 

 

관련상품

등록된 상품이 없습니다.

상품문의

등록된 상품문의

상품문의가 없습니다.


회사명 티엠웨이  대표 안영상 주소 인천광역시 서구 보듬로 158 블루텍지식산업센터 공존동 624호
사업자 등록번호 279-38-00064 통신판매업신고번호 제 2022-인천서구-0752호 사업자정보확인
전화 070-7621-3327 팩스 02-6455-4427
개인정보 보호책임자 안영상
Copyright © 티엠웨이. All Rights Reserved.