구입 및 기술문의 : 010-4221-0660
7100 시리즈는 저가형 Safety 테스터로 7315모델과 함께 연동 가능 하며 네 가지의 테스트를 하실 수 있습니다.
특징
1. Three Common Safety Tests: ACW, DCW & IR
2. Enhanced 128 x 64 graphic LCD display
3. Able to link with 7315 Ground Bond Tester to form a 19" rack
4. Capable of linking up to 100 testers
5. Storage up to 10 memories with 3 steps per memory to perform any of the safety tests in any sequence
6. Patented DC Hipot force discharge in less than 0.2 seconds to protect operators from electrical shock
7. Patented Smart GFI circuit detects human body contact and shut down the high voltage immediately
8. Front panel software calibration
9. Built-in PLC Remote interface
10. Compact size and light weight
7100 Series Modular Hipot / Insulation Tester
| MODEL | 7130 | 7132 | 7140 | 7142 |
|---|---|---|---|---|
| AC WITHSTAND VOLTAGE | ||||
| Output Rating | 5KVAC/20mA | |||
| Range | Resolution | Accuracy | ||
| Output Voltage, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
| Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | |||
| Output Regulation | ± (1% of output + 5V), From no load to full load | |||
| SETTINGS | ||||
| Max-Limit AC Current, mA | 0 - 20.00 | 0.01 | ±（2% of setting + 2counts） | |
| Min-Limit AC Current, mA | 0 - 9.999 | 0.001 | ±（2% of setting + 2counts） | |
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Ramp Down Time, second | 0 - 999.9 | 0.1 | ||
| Dwell Time, second | 0, 0.3 - 999.9 (0=continuous) | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| DC WITHSTAND VOLTAGE (7140,7142 ONLY) | ||||
| Output Rating | 6KVDC/7500µA | |||
| Output Voltage, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Ripple | < 5%（6KV/7500µA at Resistive Load） | |||
| SETTINGS | ||||
| Max-Limit DC Current, µA | 0 - 7500 | 1 | ±（2% of setting + 2counts） | |
| Min-Limit DC Current, µA | 0 - 999.9 | 0.1 | ±（2% of setting + 2counts） | |
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Ramp Down Time, second | 0, 1.0 - 999.9 | 0.1 | ||
| Dwell Time, second | 0, 0.4 - 999.9(0=continuous) | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| Discharge Time | ? 200 msec | |||
| INSULATION RESISTANCE (7132,7142 ONLY) | ||||
| Output Rating | 1KVDC/9999MΩ | |||
| Output Voltage, DCV | 30 - 1000 | 10 | ±（2% of setting + 5V） | |
| SETTINGS | ||||
| Max-Limit Resistance, MΩ | 0, 1 - 9999 (0=OFF) | 1 | ±（2% of setting+2counts）at 500-1000VDC,1 -1000 MΩ | |
| Min-Limit Resistance, MΩ | 1 - 9999 | 1 | ±（5% of setting+2counts）at 500-1000VDC,1000 -9999 MΩ | |
| ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ | ||||
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Ramp Down Time, second | 0, 1.0 - 999.9 | 0.1 | ||
| Delay Time, second | 0, 0.5 - 999.9(0=continuous) | 0.1 | ||
| MEASUREMENT | ||||
| AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
| DC Voltage, V (IR only) | 30 - 1000 | 1 | ±（1.5% of reading + 5V） | |
| AC Current, mA | 0 - 3.500 | 0.001 | ±（2% of reading + 2counts） | |
| 3.00 - 20.00 | 0.01 | |||
| DC Current, µA | 0 - 350.0 | 0.1 | ±（2% of reading + 2counts） | |
| DC Current, mA | 0.300 - 3.500 | 0.001 | ||
| 3.00 - 7.50 | 0.01 | |||
| Resistance, , MΩ | 1 - 9999 (Auto Range) | 0.001 0.01 0.1 1 | ±（2% of setting+2counts）at 500-1000VDC, 1 -1000 MΩ ±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ | |
| GENERAL | ||||
| Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A | |||
| PLC Remote Control | Input : Test , Reset , Memory1.2.3 , Interlock | |||
| Output : Pass , Fail , Processing , Reset-Out | ||||
| Interface(Option) | RS485 Interface | |||
| Memory | 10 memories, 3 steps/memory | |||
| Graphic Display | 128×64 Graphic LCD | |||
| Safety | Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS | |||
| Key Lock | To prevent unauthorized alteration of the test Parameters | |||
| Calibration | Build-in software and external calibrated meters | |||
| Verification | Build-in software driven verification menu to test fault detection circuits | |||
| Alarm Volume Setting | Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume. | |||
| Environment | 0-40℃, 20-80%RH | |||
| Dimension/Net Weight | 215mm(W)×89mm(H)×370mm(D)/ 10Kg | |||
| STANDARD ACCESSORIES | ||||
| Power Cord(10A) | ×1 | |||
| Fuses | ×2 (Including a spare contained in the fuse holder) | |||
| Interlock Disable Key(1505) | ×1 | |||
| Hipot Test Lead ,1.5m(1101) | ×1 | |||
| Hipot Return Lead ,1.8m(1102) | ×1 | |||
| *product specifications are subject to change without notice. | ||||
등록된 상품이 없습니다.
상품문의가 없습니다.
