구입 및 기술문의 : 010-4221-0660
E4428C provides high spectral purity, level accuracy, output power, and analog modulation performance up to 6 GHz for all test needs. With the option 503, it features the frequency range of 250 kHz to 3 GHz. With the option 506, E4438C features the frequency range of 250 kHz to 6 GHz.
The E4428C is a 6 GHz RF Generator from Agilent. An RF generator is a tool engineers use to generate sinusoidal outputs while testing electronic equipment. The output will automatically have its frequency varied or swept between frequencies. A “sweep” is one complete cycle of a frequency variation. Engineers use RF signal generators as test equipment, mostly to measure responses of filters, amplifiers, and electrical components. Key features for ESG series:
- 250 kHz to 3 or 6 GHz (0.01 Hz resolution)
- -136 to 17 dBm @1 GHZ and 10 dBm @ 6 GHz output power
- ±0.5 to ±0.9 dB level accuracy (> -110 dBm)
E4428C is ideal suited for the test of CW, AM, ØM, and FM receiver and component signals in the cellular, ISM, and UNII frequency bands.
Frequency Range | 250 kHz ~ 6 GHz |
Frequency Minimum | 100 kHz |
Frequency Resolution | 0.01 Hz |
RF reference input Frequency | 1, 2, 5, 10 MHz ±0.2 ppm |
RF reference output Frequency | 10 MHz |
RF reference output Amplitude | 4 dBm ±2 dB |
Additional Features:
- 250 kHz to 3 or 6 GHz (.01 Hz resolution)
- -136 to 17 dBm @ 1 GHz and 10 dBm @ 6 GHz output power
- +/-0.5 to +/-0.9 dB level accuracy (> -110 dBm)
- -134 dBc/Hz SSB phase noise @ 20 kHz offset, 1 GHz carrier (typ)
- Enhanced phase noise performance (Option UNJ) ships standard
- High-stability timebase: oven-controlled crystal oscillator (OXCO)
- AM, FM, ØM, and pulse (may be simultaneously enabled)
- Typical 6 ns rise/fall times and 20 ns pulse width
- Dual internal function generators: sine, square, triangular, ramp, and noise
- 10BaseT LAN and GPIB
- SCPI and IVI-COM drivers
- Backwards compatible with all ESG signal generators
The Agilent E4428C ESG analog signal generator delivers outstanding spectral purity, level accuracy, output power, and analog modulation performance up to 3 or 6 GHz for all general-purpose test needs. This makes the Agilent E4428C ESG a superb choice for general-purpose tests requiring CW, AM, ØM, and FM receiver and component test signals in the cellular, ISM, and UNII frequency bands.