구입 및 기술문의 : 010-4221-0660

고전압 디퍼런셜 프로브는 테스트 지점이 지면에 있지 않은 테스트 지점 2개 간의 전압 차를 측정하는 데 사용됩니다. 텍트로닉스의 고전압 디퍼런셜 프로브는 신호를 최대 6000V까지 측정할 수 있습니다. 이러한 프로브는 커먼 모드 거부 기능이 있으므로 주로 비접지 기준, 플로팅 또는 분리 측정에 적합합니다. 이러한 제품은 텍트로닉스에서 설계, 제조 및 제공합니다.

P5200A 50 MHz, 50X/500X Attenuation High-voltage Active Differential Probe

The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.

WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.

The P5210A is a Differential Probe that is capable of measuring floating voltages up to 5,600 V safely and has a bandwidth up to 50 MHz. It is supplied with two sizes of hook tips and has an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe. It can be used with Tektronix TEKPROBE™ interface oscilloscopes directly or with any oscilloscope with the use of the 1103 TEKPROBE^® Power Supply.

The P5205A is a 100 MHz Active Differential Probe capable of measuring fast rise times of signals in floating circuits. This 1,300 V differential probe can safely measure voltages in IGBT circuits such as motor drives or power converters. It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE^® interface. The P5202A is similar to the P5205A, but this probe has approximately half the attenuation and half the dynamic range of the P5205A and better signal-to-noise ratio.