구입 및 기술문의 : 010-4221-0660

• 이 4슬롯 메인프레임은 최대 600W의 총 전력을 처리하고 최대 4모듈의 장착이 가능하며 21가지 DC 전력 모듈을 선택할 수 있습니다(모듈은 별도 주문).
• 전압 단계 변경당 최대 160 ms의 출력 속도
• 전압계 정확도: 최대 0.016% + 1.5 mV, 최대 18비트
• 전류계 정확도: 최대 0.03% + 15 μA, 최대 18비트
• 임의 파형 발생기 기능: 최대 대역폭 4500 Hz, 최대 출력 전력 300 W
• 스코프 기능으로 50 kHz, 4096포인트, 최대 18비트에서 전압 및 전류 디지털화
• 데이터로거 기능: 1 ms ~ 60 s의 측정 간격, 데이터로그당 최대 500 M 판독
• 데이터로그, 스코프 트레이스, 계측기 설정을 위한 64 MB의 비휘발성 데이터 저장 공간

N6705A 전원 분석기는 최대 4개의 고급 전원 공급기와 DMM, 스코프, Arb 및 데이터로거 기능을 통합함으로써 DC 전압 및 전류를 DUT에 소싱 및 측정하기 위한 최고의 생산성 이득을 제공합니다. N6705A에서는 여러 대의 장비를 수집해서 트랜스듀서(예: 전류 프로브 및 션트)를 포함한 복잡한 테스트 셋업을 생성하여 전류를 DUT에 측정할 필요가 없습니다. 또한 DC 전력 분석기에서는 모든 기능 및 측정을 전면판에서 사용할 수 있기 때문에 계측기 컬렉션을 제어하고 유용한 측정을 수행하기 위해 프로그램을 개발 및 디버그하지 않아도 됩니다. 자동 벤치 셋업이 필요한 경우 N6705A는 GPIB, USB, LAN을 통해 완전 프로그래밍이 가능하며 LXI Compliant와 호환됩니다. 

사용자의 요구에 맞게 N6705A 맞춤화 가능

N6705A는 사용자의 전력 소싱 및 분석 요구사항에 부응하는 유연한 구성을 제공합니다. N6705A는 최대 4개의 DC 전력 모듈 및 최대 600W의 총 DC 전력 모듈 출력 전력을 수용하는 4슬롯 메인프레임입니다. 이 모듈은 별도로 주문합니다.

N6705A는 N6700 모듈러 전력 시스템과 동일한 모듈을 지원하며 21개의 모듈 중에서 선택할 수 있습니다. N6705A에 대한 기본 소스에는 50W, 100W 및 300W; 최대 100V, 최대 20A가 포함됩니다. N6705A에 대한 고성능 소스에는 50W, 100W 및 300W; 최대 60V, 최대 20A가 포함됩니다. N6705A에 대한 고정밀 소스에는 50W 및 100W; 최대 50V, 최대 3A가 포함됩니다. 각 모듈에는 내장 전압계, 전류계, 스코프, 임의 파형 발생기 및 데이터로거 기능이 포함됩니다.

• Ideal for ATE systems in R&D, design validation, and manufacturing
• Small size: up to four outputs in 1U of rack space
• Flexible, modular system: Lets you mix and match power levels and performance levels to optimize your investment
• Performance modules for critical test requirements
• Value modules for basic DC power requirements
• Sources and measures DC voltage and current into your device under test
• Combines one to four DC power supplies, DMM, oscilloscope, arbitrary waveform generator, and data logger in one integrated instrument
• Saves time – no programming required
• Eliminates the need to gather and configure multiple instruments
• Fast command processing time and output speed to improve throughput
• Connect via GPIB, LAN, or USB
• Fully compliant to LXI Class C specification

The Agilent N6705A DC Power Analyzer provides unrivaled productivity gains for sourcing and measuring DC voltage and current into the DUT by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger features. The Agilent N6705A eliminates the need to gather multiple pieces of equipment and create complex test setups including transducers (such as current probes and shunts) to measure current into your DUT.

The DC Power Analyzer also eliminates the need to develop and debug programs to control a collection of instruments and take useful measurements because all functions and measurements are available at the front panel. For even greater control and analysis functions, the DC Power Analyzer can be used with the Agilent 14585A Control and Analysis Software.

Small Size and Flexibility for ATE

Power supplies are a fundamental component of every test system in industries including aerospace and defense, consumer electronics, computers and peripherals, communications, semiconductor and automotive electronics. Today’s complex automatic test equipment (ATE) systems often require multiple power sources. Test system designers are challenged to keep costs down by reducing rack space occupied by these multiple power supplies and to continually increase test system throughput.

The Agilent N6700 Low-Profile Modular Power System (MPS) is a 1U (rack unit) high, multiple-output programmable DC power supply system that enables test system integrators to optimize performance, power and price to match test needs.

The Agilent N6700 MPS gives test system designers the flexibility to mix and match from over 30 different DC power modules to create a 1- to 4-channel DC power system optimized to meet specific test requirements. Test system engineers can invest in high-performance outputs where speed and accuracy are needed, or purchase basic performance outputs for simple DC power requirements.

Small size

The Agilent N6700 MPS uses an advanced switching power supply design that fits within 1U of rack space (1.75 in./44 mm). It has side air vents (no top or bottom air vents) so other instruments can be mounted directly above or below it.

Built-in measurement of voltage and current

The N6700 modules come standard with built-in measurement of voltage and current to simplify wiring and design of an ATE system.

Protection features

Each N6700 module is protected against over-voltage, over-current, and over-temperature. A fault condition in one module can be detected within 10 microseconds by other modules so that they can be quickly shut down to avoid hazardous conditions on your device under test (DUT).

Connectivity

The N6700 MPS comes standard with GPIB, USB 2.0, and 10/100 Base-T ethernet LAN interfaces. While GPIB is best suited for use with existing systems, Agilent offers USB and LAN to allow you to take advantage of the availability, speed, and ease-of-use of common computer industry standard interfaces. The N6700 is fully compliant with the LXI Class C specification.

Security

When used in systems running GPIB, the LAN and/or USB interfaces can be disabled for extra security. Also, all non-volatile RAM data and settings can be cleared from the front panel.

Control from any browser

The N6700 can be controlled via a standard web browser. The N6700 contains a web server that provides web pages for monitor, control, and setup of the MPS.

Output sequencing

Each DC power module can be individually set to turn on or to turn off with a delay. By adjusting the delay times and then commanding the N6700 to turn on, you can set the N6700 modules to sequence on in a particular order. The same sequencing capability is available to shut down the modules in a particular order.

For applications that require more than four DC power modules to be sequenced, this output sequencing can be extended across multiple N6700 mainframes. When the I/O ports on the rear panel of the mainframes are wired together, a pair of synchronization signals can be sent between mainframes, allowing the output sequences of all mainframes to be synchronized. This capability is supported on N6700B, N6701A and N6702A mainframes. It is not supported on the discontinued N6700A mainframe.