구입 및 기술문의 : 010-4221-0660
The NoiseKen's Impulse Noise Simulator INS-4020/4040 is a further development from our versatile INS series simulators for greater ease of use, durability and reliability with new technologies specifically applied to this new product. The most significant addition is automatic ramp operation in output voltage, pulse repetition period and phase angle placement.
| Item | Model | ||
| INS-4020 (2kV) | INS-4040(4kV) | ||
| Output voltage | 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step | 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step | |
| Polarity | Positive or negative | ||
| Square wave | Pulse width | 50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns±3ns (the shortest connection) | |
| Pulse rise time | < 1ns | ||
| Output impedance | 50 ohm system (53.5 ohm) | ||
| Pulse repetition mode | VARIABLE | 10ms ~ 999ms±10%, 1ms step | 16ms ~ 999ms±10%, 1ms step |
| PHASE | 50 or 60Hz, Injection phase angle 0~359°, 1° step, synchronized with L1 - L2 power line frequency for EUT | ||
| EXT | <EXT mode> >10ms, Pulse width>1ms TTL/Open collector negative logic | <EXT mode> >16ms, Pulse width>1ms TTL/Open collector negative logic | |
| Also functions for timing reference signals input from an external injection unit | |||
| 1 SHOT | Single pulse injection to the angle selected by PHASE setting, or irrelevant with the EUT line frequency | ||
| Memory | Up to 5 test settings | ||
| Power capacity of equipment under test | AC 240V, DC60V, Single phase, DC60V 16A | ||
| Power supply | AC100 ~ 240V 50/60H | ||
| Power consumption | 140VA | ||
| Operating temperature and humidity | 15~35°C / 25~75% (No dewing shall occur.) | ||
| Dimensions | (W) 430 X (H) 249 X (D) 420 mm(Projections excluded) | ||
| Weight | Approx. 19kgs | ||
등록된 상품이 없습니다.
상품문의가 없습니다.
